Small sized AC current clamp
Fluke Current clamps are the ideal tools to extend the current ranges of Multimeters.
The i200 is a single range 200A ac current clamp with current output via safety shrouded banana plugs. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
- Companion to a DMM to measure up to 200 A AC
- 1mA per Amp output guarantees easy reading on you meter
- Take accurate current readings without breaking the circuit
- Max. conductor Ø 20 mm
- CAT III 600V safety rating
|
| Specifications |
| Nominal current range |
|
| Continuous current range |
|
| Maximum Non-Destructive Current |
|
| Lowest measurable current |
|
| Basic Accuracy |
| |
1% + 0.5 A |
| |
(48-65 Hz) |
| |
(% reading + floorspec) |
|
| Useable frequency |
|
| Output level(s) |
|
| Safety Specifications |
| Safety |
|
| Maximum voltage |
|
| Mechanical & General Specifications |
| Warranty |
|
| Maximum conductor diameter |
|
| Maximum conductor size (busbar) |
|
| Output cable length |
|
| Shrouded banana plugs |
|
QQ交谈|
MSN客服
