HIOKI 8870存储记录仪为日文面板,HIOKI 8870-20存储记录仪为英文面板,HIOKI 8870-21存储记录仪为中文面板,上海君达为日置HIOKI 8870-21存储记录仪供货平台,现提供免费上门演示服务,详情请咨询当地分公司!HIOKI 8870存储记录仪主要应用在电压信号记录,扑捉设备的故障信号,所以HIOKI 8870-21又叫电压记录仪。
各地咨询电话:
上海:021-51877860, 联系人:王先生
北京:010-51269618 联系人:路先生
无锡:0512-88212415, 联系人:王先生
存储记录仪 8870-21的性能:
存储记录仪 8870-21 (中文版),存储记录仪 8870-20 (英文版)
- 携带方便
- 操作简单
- 实现和PC的连接
- 4.3型WQVGA-TFT的彩色液晶显示
- 外形小巧,1M的高速采样
- 实体不含带输入电缆, 电池。请按照实际情况另外购买。AC适配器附带标准。
- 不受时间,地点,环境的限制。轻松愉快地记录!
存储记录仪 8870-21的基本参数 (准确度保证期限:1年)
通道数 | 2个模拟通道+4个逻辑通道 (模拟通道和主体之间是绝缘的,逻辑GND和主体之间是共通的) |
测量量程 (10div满量程) |
10mV~50V/div,12量程,分辨率:量程的1/100 |
最大输入电压 | DC 400V |
频率特征 | DC ~ 50kHz (-3dB) |
时间轴 (储存功能时) |
100μs~5min/div,20量程,时间轴的分辨率100point/div,时间轴扩大:×2~×10的3段,压缩:1/2~1/1,000的9段 |
测量功能 | 储存记录(高速记录) |
内存容量 | 12位×2M字码/通道 |
保存媒体 | CF卡TYPEⅠ卡槽×1,最大到1GB |
显示屏 | 4.3型WQVGA-TFT彩色液晶(480×272点) |
外部接口 | USB:标准USB2.0 |
记录输出 | 没有打印功能 |
其他机能 | 数值演算,光标测量,定标,画面拷贝,波形数据处理/设定功能支持,起始状态闪寸,自动保存,瞬间值和有效值的保存,时钟 |
电源 | AC适配器9786:AC100V~240V(50/60Hz) 电池组(选件) DC 12V系列:DC10~16V |
通过电池 | 9780与AC适配器连接充电器,即可充电。充电时间约为200分(25℃参考价值) *充电时间按照电池的质量好坏而变化。 *实体环境温度5°C ~ 30℃的范围为充电许可范围。 |
尺寸·质量 | 176W×101H×41Dmm,550g (包括电源供应9780) |
附件 | AC适配器9786×1,吊带×1,USB电缆×1,测量卡×1,8870-21专用软件处理(CD-R×1) |
存储记录仪HIOKI 8870 MEMORY HiCORDER 8870-20
Easy recording anytime, anywhere!
- Compact and easy to carry
- Easy, intuitive operation
- Simple PC connection
- Fast, 1MS/s performance despite the compact size
- Built-in, compact-yet-sharp QVGA-TFT wide LCD
Basic specifications (Accuracy guaranteed for 1 year)
Number of channels | 2 analog and 4 logic channels (standard equipment, logic grounds are common with instrument ground) |
Measurement ranges (10 div full-scale) |
10mV to 50V/div, 12 ranges, resolution : 1/100 of range |
Max. allowable input | DC 400V |
Frequency characteristics | DC to 50kHz (-3dB) |
Time axis | 100 μs to 5 min/div, 20 ranges,at 100 points/div resolution, three steps of time-axis magnification from 2× to 10×, and nine steps of time-axis compression from 0.5× to 0.001×. |
Measurement functions | MEM (high-speed recording) |
Memory capacity | 12-bits × 2M-Words/ch |
Removable storage | CF Card Type I slot × 1, Up to 1 GB |
Display | 4.3-inch WQVGA-TFT color LCD (480 × 272 dots) |
External interfaces | One USB 2.0 High Speed mini-B receptacle: transfers files from the installed CF card to a PC when connected (mass storage class device) Note: The CF card installed in the HiCORDER appears as a removable disk on the PC, but communication functions such as the capability to change HiCORDER settings from the PC are not provided. |
Printer | None |
Functions | Numerical calculation, Cursor readout, Scaling function, Screen copy, Gauge display, Waveform data / Setting configurations backup, start condition retention, Auto-save, Instantaneous value or RMS value display (only DC and 50/60 Hz) |
Power consumption | Use with the AC ADAPTER 9786: 100 to 240V AC (50/60 Hz) 30 VA Max. BATTERY PACK 9780: Continuous use 2 hours (AC adapter has priority when both are used) 12V DC supply: 10 to 16V, 10VA Max. (cable available by special order) |
Charging functions | The installed battery pack charges when the AC adapter is connected. Charging time is about 200 minutes at 25°C. Notes: Charging time depends on battery condition. Charging is disabled to protect the battery at ambient temperatures out of 5°C to 30°C. |
Dimensions, mass | 176mm (6.93in) W × 101mm (3.98in) H × 41mm (1.61in) D, 600g (21.2oz) (with the BATTERY PACK 9780 installed) |
Supplied accessories | Instruction Manual × 1, Measurement Guide × 1, AC ADAPTER 9786 × 1, Strap × 1, USB cable × 1, Application Disk (dedicated program for the 8870-20/-21) × 1, PROTECTION SHEET 9809 × 1 |
CONNECTION CORD 9790:(Thin Type) CAT II 300V, ultra-flexible 2.8mm (0.11in) diameter test lead cable, 1.5m (4.92ft) long
Note: Attachment clips sold separately.
ALLIGATOR CLIP 9790-01:Red/black set attaches to the ends of test leads (9790)
GRABBER CLIP 9790-02:Red/black set attaches to the ends of test leads (9790)
CONTACT PIN 9790-03:Red/black set attaches to the ends of test leads (9790)
Battery Pack
BATTERY PACK 9780:NiMH, Charges while installed, Charges while installed in the HiCORDER
Voltage measurement (Separate power supply required for probe)
DIFFERENTIAL PROBE 9322:2kV DC for input up to 1kV AC, CAT III-600V and CAT II-1000V maximum terminal-to-ground rating
AC ADAPTER 9418-15:For powering Differential probe 9322, 100 to 240 V AC, 12 V/2.5 A
CONNECTION CORD 9198:CAT II-300V, 5-mm (0.20in) dia. cable, 1.5m (4.92ft) length
CONNECTION CORD 9197:CAT II-500V, 5-mm (0.20in) dia. cable, 1.5m (4.92ft) length
Logic signal measurement (One probe provides 4 measurement channels)
LOGIC PROBE 9320-01:4-channel type, for voltage/contact signal ON/OFF detection (miniature terminal type)
LOGIC PROBE 9321-01:4 isolated channels, ON/OFF detection of AC/DC voltage (miniature terminal type)
CONVERSION CABLE 9323:Used for connecting the 9320/9321 and 8870 series MEMORY HiCORDERs, because the terminal shapes are different.
* This cable is not required for the small terminal types 9320-01 and 9321-01.
Removable storage
PC Card Precaution:Use only PC Cards sold by HIOKI. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards. Supplied with PC Card adapter.
PC CARD 128M 9726:(PCMCIA adapter and compact flash memory card set, 128MB)
PC CARD 256M 9727:(PCMCIA adapter and compact flash memory card set, 256MB)
PC CARD 512M 9728:(PCMCIA adapter and compact flash memory card set, 512MB)
PC CARD 1G 9729:(PCMCIA adapter and compact flash memory card set, 1GB)
Case
SOFT CASE 9812:Includes space for small items, Neoprene rubber
CARRYING CASE 9782:Includes compartment for options, Resin coated
Supplied Accessories
PROTECTION SHEET 9809:For LCD protection, pairs of additional sheets can be purchased separately.
AC ADAPTER 9786”100 to 240V AC
Current measurement
CLAMP ON PROBE 9018-50:10 A to 500 A
CLAMP ON PROBE 9132-10:20A to 1000A, Not CE marked
CLAMP ON LEAK HiTESTER 3283:10mA to 200A AC
CLAMP ON AC/DC HiTESTER 3284:20A to 200A AC/DC
CLAMP ON AC/DC HiTESTER 3285:200A to 2000A AC/DC
AC ADAPTER 9445-02/-03:for the 3283/ 3284/ 3285, 9V/1A
OUTPUT CORD 9094:3.5-mm mini plug, and banana plugs, 1.5m (4.92ft) length, Not CE marked
CONVERSION ADAPTER 9199:Female banana terminals to BNC plug (output)
Clamp tester connection requires Output Cord 9094 and Conversion Adapter 9199.
hioki 8870-20 memory hicorder :12000元
hioki 9780 battery pack: 1200元
hioki 9782 carrying case: 1300元
hioki 9786 ac adapter: 1200元